Is it possible to put a second door number in SiteLink?

OHS
OHS Registered User ✭✭
We have many units that are 25' or 30' with a door on each end.   It would be helpful to both tenants and staff if we could list the second door number. Is this possible? I have tried but it does not look like Site Link allows.

Answers

  • themage
    themage Registered User, Daily Operations Certified, Advanced Operations Certified, Administrator Certified, myHub Certified ✭✭✭✭✭
    We used to list our double door units as A01A35, for example, when our gate system accepted 6 character unit names.  Our updated gates cant handle it, so now it is named A01DD (for double door) and we have a list for the second door.


  • BusyProperties
    BusyProperties Registered User ✭✭✭

    We entered ours with two door #'s when we set it up & add a note to the map so it is visible that they are essentially "one" unit. They are a full 30' but no wall to separate. When you rent you will have to "rent" them both units but it can be done. 
  • AnitaJohnson1269
    AnitaJohnson1269 Registered User ✭✭✭✭
    edited August 15
    We have plenty of units with double doors, the owner had both doors labeled the same. Say, unit 345... both sides are numbered "345". 
  • Self_Storage_Life
    Self_Storage_Life Registered User ✭✭✭
    I have the same thing.  I believe the max is 6 digits so for 601 & 612 I use 601612.  On my 1000 building I use the lowest unit number first 1001 and the last 2 digits of the higher number door 1012 = 100112
  • GlenMark
    GlenMark Registered User ✭✭✭
    We've made double door 10x30s, but rent them as two 10x15s with their individual unit numbers. Seems to work just fine for us and our tenants.

© 2018 SiteLink Software, LLC. All Rights Reserved

Terms of Use  |  Privacy Policy   |  Cookies Policy   |  Help  |  Contact Community Manager   |  Change Marketplace Ads